MiniMount
Bench Plates
-- Mounting
Posts --Post Lock Ring --
Post
Holders --Right
Angle Connectors
--Flat and Angle connectors--English/Metric
Adapter--MiniMount Kits
We are introducing new and unique series of mounting hardware
that is specially designed for biophysical or electrophysiological application.
These products are lightweight and compact. The whole series is build
around 6 mm diameter mounting rods and 6 mm thick, 30 mm square pattern
bench plates. It can be combined with widely used British standard
of opto-mechanical components and with precision 6 mm based optical bench
parts from Spindler & Hoyer. Unlike the typical optomechanical
hardware that have nonconductive black anodized surface, all our components
have bare metal surface that ensure easy electrical interconnection.
Electrical resistance between connected non anodized aluminum parts is
very low. This make our components perfect for use in systems for
sensitive electrical measurements. You do not have to drill extra
holes in or scratch all parts in a complex system to have them electrically
connected for proper grounding. We guaranty that when parts are connected
mechanically, they are connected electrically. If you need black
non-reflecting surfaces simply apply black spray enamel were needed.
Bench
Plates.
Manufactured from solid aluminum our Bench Plates provide
base for various configuration of components. Each plate have
a number of M5 threaded holes on a square pattern with 30 mm distance between
centers. Currently two standard sizes are available but other
can be manufactured at your request.
| Part # |
Length, cm |
Width, cm |
Thickness, mm |
# of holes |
| BP6-2030 |
30 |
20 |
6 |
70 |
| BP6-3040 |
40 |
30 |
6 |
140 |
Mounting
Posts.
These 6 mm diameter, lightweight but durable stainless
steel posts mounts directly, or with Post Holder
to our BP-XX bench plates. T-indexed posts have M5 male thread at one end
and M4 threaded hole on another.
| Part # |
Length (mm) |
| MP6-60 |
60 |
| MP6-100 |
100 |
| MP6-60T |
60 |
| MP6-100T |
100 |
Post
Lock Ring
This 12.7 mm (0.5") diameter aluminum
lock ring fits 6mm diameter mounting posts. When ring is locked,
the post can be rotated in the post holder without readjusting height.
M4 screw is included.
Part #: PLR-6
. 
Post
Holders
These aluminum post holders accept 6 mm diameter mounting
posts. Since they have 12.7 mm (0.5") outside diameter, this post
holders fit inside British standard post holders increasing possibilities
for the design of complex systems. Lock screw for post height adjustment
and Allen screw for mounting to an optical plate are included.
Part # PH6-40 (40 mm long); PH6-80(80mm
long)
Right
Angle Connectors
These connectors are used for 90 degree connection of
Mounting
Posts. Two versions are available.
RAC6-6
connect two 6 mm diameter posts, and RAC6-12
connect 6 mm and to 0.5" (12.7 mm) post or to our PH6-XX post holders.
Screws are included. Aluminum.
Part#:
RAC6-6 and RAC6-12.
Flat
and Angle connectors.
These simple but useful parts complement our line of
MiniMounts. Each FC-6 connector is 50x30
mm rectangle with a pair of 5 mm diameter holes, 30 mm apart and 2 mm marker
hole in the middle that can be easily drilled to a larger size if requred
for specific applications. AC-6 connector has similar holes pattern
on a 20x20x50 mm aluminum angle. May be used for connection or horizontal
installation of MP6-XT posts.
Hardware
Kit
If you need more metric hardware than included with MiniMount
components listed above you can add an extra hardware kit to your order.
HK-10 kit includes 10 each of: M5x6mm Pan
Head Screw; M5x10mm Set Screw; M4x6mm Pan Head Screw; M4x6mm Flat Head
Screw; M4x4 mm Set Screw; M4 and M5 hex nuts.
For other hardware components please visit MiscHardware
page.
English/Metric
Adapters
Using these adapters you can connect
MiniMount components with English standard parts. Screws shown above
left has 1/4-20 tpi thread at one side and M5 thread on the other side.
They allow mounting of MiniMount post holders on any English standard bench
plates or mounting of English standard posts/post holders on our BP6-XXXX
bench plates. Part #: EMS-1
Adapters shown in the center of the left picture are 12.5 mm diameter,
15 mm long cylinders with 1/4-20 tpi threaded hole at one side and M5 hole
on the other side. They can be used for mounting of 0.5" posts to
BP6-XXXX
bench plates ot MP6-XXX
posts to English bench plates. Part #: EMA-1
MiniMount
Kits
| ITEM |
DESCRIPTION |
MMK-1 |
MMK-2 |
MMK-3 |
| PLR-6 |
Post Lock Ring |
1 |
3 |
6 |
| PH-40 |
40 mm Post Holder |
1 |
4 |
8 |
| PH-80 |
80 mm Post Holder |
1 |
4 |
8 |
| MP-60 |
60 mm Mounting Post |
1 |
4 |
10 |
| MP-60T |
60 mm Mounting Post Threaded |
1 |
3 |
6 |
| MP-100 |
100 mm Mounting Post |
1 |
4 |
10 |
| MP-100T |
100 mm Mounting Post Threaded |
1 |
3 |
6 |
| RAC-66 |
Right Angle Connector for 6 mm Rods |
1 |
4 |
10 |
| RAC-613 |
Right Angle Connector for 6/12.7 mm Rods |
1 |
3 |
6 |
| FC-50 |
Flat Connector |
1 |
2 |
6 |
| AC-50 |
Angle Connector |
1 |
2 |
6 |
| HK-10 |
Hardware Kit |
- |
1 |
2 |
| EMS-1 |
English/Metric Adapters |
- |
1 |
3 |
| EMA-1 |
English/Metric Adapters |
- |
1 |
3 |
Go to
Prices
Back to the top of the page.
HOME.
Date of latest modification: 2-04-2007